Best Epoxy Flooring Contractors in Greensboro, NC

We Offer Special Discounts for Military/ Veterans and First Responders

Epoxy Flooring Contractors Greensboro, Nc

Over time, any type of floor will take a beating. Whether you are driving heavy cars over your garage floor or are constantly walking on the hardwood floors in your home, you will need to replace or refinish them eventually.

Young Flooring has the best epoxy flooring contractors in Greensboro, NC. Our contractors are professional and have experience installing and refinishing all kinds of flooring. From epoxy flooring and polyaspartic flooring to pool decks and hardwood floors, Young Flooring can do it all. Call us today at 336-403-5936.

RECEIVE A QUOTE INSTANTLY

Select your floor options below. After you submit the form, check your email for a quote. We will contact you to verify your quote in-person, and you receive an extra 10% off!

Industry(Required)

Desired Floor Coating

Your Floor Size in Square Feet(Required)

(Multiply your floor's width x length)

Floor Location

Current Floor Condition

Does the concrete floor have joints that need covering?

What is the length of joints in linear feet?

Does the concrete have a curb?

Is entryway at least 32" wide?

Is the entry a double door or walk-in?

When would you ideally like the project to be completed?(Required)

SubTotal

Price: $0.00

First Name(Required)

Email(Required)

Phone(Required)

State(Required)

Zip Code(Required)

Comments

This field is for validation purposes and should be left unchanged.

Greensboro, NC, Epoxy Flooring Services

At Young Flooring, we specialize in a variety of flooring types. Whether you want to install a durable floor in your garage or you want to install beautiful hardwood floors in your home, Young Flooring can do it all.

The staff at Young Flooring know that you care about how your floors look at the end of the installation process. We offer a range of different colors and textures for our various floor coatings. We also offer different shade ranges for our laminate, vinyl, and hardwood flooring. When you work with us, you will have plenty of options regarding how your flooring will look.

Garage Floor, Basement, and Commercial Coatings

We specialize in both epoxy and polyaspartic coatings for the above types of floors. These materials are durable and long-lasting. They are perfect for driving on with cars or heavy equipment and can handle a lot of weight.

Pool Deck Coatings

Protect your pool deck with special coatings from Young Flooring. The hot North Carolina sun can damage your pool deck and cause it to become weak over time. Let us protect it so that you can enjoy your pool and deck for years to come.

Why Choose Young Flooring?

If you want the best epoxy flooring contractors in Greensboro, NC, you’ll want to work with Young Flooring. The contractors and staff at Young Flooring are professional and have training that gives them expertise in all types of flooring.

Also, Young Flooring emphasizes continuing education. We realize that the flooring industry is always changing and innovating. We want to continue to be the best epoxy flooring contractors in Greensboro, NC, so we stay on top of new materials and techniques and always implement the best practices.

Young Flooring stands out from the competition because we specialize in polyaspartic base and top coats for garage, commercial, and basement flooring. Polyaspartic flooring is an alternative to epoxy that is growing in popularity. Epoxy was the flooring material of choice for years because of its durability. Epoxy flooring is not likely to break from weight or use but can become damaged from scratches on the surface.

Polyaspartic flooring is similar to epoxy, except it is even more durable to scratches thanks to its slight flexibility. Polyaspartic flooring is also faster to install since each coat takes less time to dry, which means less pollution is involved when we install a polyaspartic floor than epoxy.

Ultimately, Young Flooring feels that polyaspartic flooring is the best choice for garages, commercial buildings, and basements. We are the best epoxy flooring contractors in Somerset, KY that specialize in polyaspartic flooring. Reach out to us today to learn more.

Commercial Concrete Coatings Somerset, KY

How It Works

Once you decide to work with Young Flooring to install or refinish your flooring, we will take you through our four-step process. This process is one that we follow with each client. It allows us to be certain that we are on the same page as our client, complete the installation following a set procedure, and do a thorough quality assurance check.

Step One: Consultation

The first step in our process is to have a consultation with our client. We don’t want to waste your time, so we will get right to business in this quick meeting. We will discuss your desired outcome and how we will achieve it. We will also explain the installation timeline and finalize all details of the flooring and the installation process.

Step Two: Prepare Floors

Next, we will prepare the floors for the actual installation. No matter what type of floor we are installing, there is preparation work involved. In this step, we will need to remove any existing flooring by either pulling it up or sanding it down. We will make sure that the floor’s surface is completely smooth so that there will be no imperfections in the new epoxy flooring. Finally, we will thoroughly clean the smoothed surface to remove any dust or debris.

Step Three: Install the Flooring

This step will look a bit different depending on the type of floor that we are installing. If you are getting laminate or vinyl flooring, we will simply lay down and install the planks by locking them together. If we install hardwood floors, we will lay down a base layer and fit the hardwood pieces into place.

If we install a pool deck coating, we will carefully cover your entire deck in the coating material and allow it to dry.

The installation process for epoxy or polyaspartic flooring is the most complex. We will start with a base coat. Then, we will lay down flakes of your choice for color and texture. Next, we will sand down the flakes until the surface is smooth again. Finally, we will add the topcoat that protects the flooring.

During this process, we need to be careful about the existing infrastructure in the room. For example, if we install this flooring in a garage, we will carefully consider the location of the garage door to make sure we don’t cause any damage.

Step Four: Quality Check

The last step in our process ensures that we are doing our best work. After the installation, we will remove our equipment and return to the project with fresh eyes. We will carefully look for any imperfections and resolve them immediately.

Other than Greensboro, NC, Young Flooring provides services in the following areas;

Call Us Today for a Free Quote!

If you are looking for the best epoxy flooring contractors in Greensboro, NC, then you’ll find them at Young Flooring. We can install any type of epoxy flooring that you desire. Call us at 336 -403-5936 to get a free quote for your upcoming project.

How Much Do Your Concrete Floor Coatings Cost?

Each project is customized to your particular concrete flooring needs. Every job we do is different, because we offer different types of coatings and finishes. We will work with you to develop a free estimate keeping your budget in mind.

How Long Will The Concrete Coating Last?

We use the highest quality materials in our polyaspartic floor coatings and we’ve perfected our application process to make the concrete coating permanent. Once completely cured and adhered, the concrete coating is meant to last as long as the substrate it’s adhered to.

What Are The Benefits Of Using Polyaspartic Floor Coatings Over Epoxy Floor Coatings?

Polyaspartic Floor Coatings dry more quickly than Epoxy Floor Coatings, and the finish is also more durable. Our floor concrete coating finishes are also more slip-resistant and will not discolor like some Epoxy Floor Coatings.

How Long Do I Need To Stay Off My Concrete Floor Coating After It Is Installed?

Our flooring cures within a few hours, however our team of professionals recommends waiting at least 4-6 hours before walking on your brand new concrete coated flooring. After 12 hours, you can begin moving lightweight objects onto the flooring, like light patio furniture. We recommend waiting a full 24 hours before moving anything heavy back into the area where we’ve applied the coating (your car, heavy equipment or furniture etc.).

Will My New Concrete Floor Coating Turn Yellow?

It sure won’t! Our concrete floor coverings will not yellow or discolor, because they are UV stable. This one of the many benefits of using Polyurea or Polyaspartic floor coatings.

Will I Need To Reseal My Concrete Floor Coating?

If you follow our maintenance and cleaning guidelines, you should not have to worry about resealing the concrete floor coating. We offer a professional grade cleaner that will easily remove stains or tire marks, but will also preserve the life of your concrete coating topcoat.

How Long Does It Take You To Apply Concrete Floor Coatings?

We’ve perfected our 6-step application process, so most typical projects take between 5-10 hours depending on the square footage. We pride ourselves in a one-day application, and will do everything possible to stay within that time frame. Rainy weather can delay the project, but it is rare.

How Do I Care For My Concrete Floor Coating?

You can clean our concrete coatings with typical sweeping, mopping or steaming, and hoses. We offer maintenance services should your concrete flooring ever need cleaning, however you can also use non-abrasive cleaners, like CLR, to remove grease or other stains.

Will Oil Stain My Concrete Floor Coating?

Young Flooring's coatings are oil resistant as well as moisture resistant.

Who Invented Polyaspartic Coatings?

Bayer Material Science first developed Polyaspartic coatings in the 1990’s to protect steel bridges and infrastructure from rusting and corrosion. It has since been modified for different applications, once being durable concrete flooring coatings.

What Are Polyaspartic Concrete Coatings?

Polyaspartic Concrete coating is another name for Aliphatic Polyurea, which is a hybrid material consisting of ester and other materials. It was originally developed to coat metal bridges. It was later used to coat concrete flooring due to its durability and moisture resistance. Polyurea is also used to coat truck bed liners.

Can Polyaspartic Floor Coatings Be Used Outside?

They sure can! We offer wonderful solutions for driveways, patios, and even the area around the pool. Our coatings are all UV stable, which will help prevent discoloration or flaking.

What Types Of Environments Can Polyaspartic Floor Coatings Be Used?

Polyaspartic flooring coatings can be used in a variety of environments. The durability, slip resistant finish is fantastic for any industrial setting, storefronts, patios, or even driveways or garages.

How Are Polyaspartic Floor Coatings Applied?

We have perfected a six step process for applying Polyaspartic Floor Coatings that involves prepping the floor, basecoating, applying chips, scraping the chips, and applying the clear UV protective clear coat.

Can I Apply Polyaspartic Floor Coatings In Cold Temperatures?

You can! Polyaspartic floor coatings are safe to apply in temperatures as cold as -40 degrees.

How Long Do Polyaspartic Floor Coatings Take To Dry?

Our Polyaspartic Floor Coatings are engineered to rapidly cure, and can be dry in a matter of a few hours! However, we recommend waiting at least 5-6 hours before walking on newly applied coating and 24 hours before moving heavy objects back onto the flooring.

Do I Need To Hire A Professional To Install Polyaspartic Floor Coating?

Installing Polyaspartic Floor Coating correctly is critical to the appearance and durability of your flooring. Hiring a professional is the best way to ensure that your flooring will look amazing and last a lifetime! Our team at Young Flooring is certified in Polyaspartic Floor Coating installation and have many years of experience.

Is It Possible To Cover Existing Epoxy Floor Coating With Polyaspartic Floor Coating?

It is! Polyaspartic floor coatings are specially formulated for their incredible adhesion properties. If you have existing patches of epoxy coating, our team can sand it down, vacuum, and wipe down the area with a solvent. Once prepped, we will apply your new, superior, Polyaspartic Floor Coating